Did Kawi keep the same mounting pattern for FC420V to V-twin?

Discussion in 'Mechanic and Repair' started by johng, Feb 24, 2007.

  1. johng

    johng LawnSite Member
    Posts: 52

    I found a great deal on a new Kawi 15 V-twin and need to know if they use the same mounting bolt patern as the FC420V I'll be replacing.
    Thanks in advance, John...
     
  2. edward hedrick

    edward hedrick LawnSite Senior Member
    Posts: 871

    I replaced a Kawi FC540 17 hp single with a 14 FC 420. same bolt pattern.

    It was on a 52 Lesco belt. to get less weight on drive wheels. The 14 works

    great. The 15 should bolt up. Watch out for electric clutches. Ed
     
  3. johng

    johng LawnSite Member
    Posts: 52

    Thanks, I thought it looked the same. This 15hp twin is going on a Bobcat Ransom 48" hydro WB so no electrics at all. Well other than the ignition.
    John..
     
  4. MowerMedic77

    MowerMedic77 LawnSite Bronze Member
    Posts: 1,164

    I would need to know your original spec# but possible replacements for the FC420V recoil starts are FH430V-CS21-S and CS22-S.
    Hope this helps:)
     

Share This Page