Ditch Witch Sk500 mini skid steer

Discussion in 'Marketplace' started by arbor pro, Jan 20, 2012.

  1. arbor pro

    arbor pro LawnSite Senior Member
    from SD
    Posts: 511

    2004 ditch witch mini skid. Sk500 model with 24hp honda gas motor that runs good. Total machine hours are 1390 but new motor was put in about 750 hours ago. Tracks are about 40% with no large cuts or tears so still very useable and actually better on lawns that new ones. The hydraulics are strong, the drive motors are good and everything works as it should.

    $6500 for machine and bucket. I also have a trencher, power broom and auger with 3 bits available for $2000 each and a rake grapple for $1250 but I will sell the entire package for $12500.

    scott 605-228-9350.

    sk500 side front.jpg
     
  2. arbor pro

    arbor pro LawnSite Senior Member
    from SD
    Posts: 511

    I'll go $7500 on the sk500 with a bucket and choice of a trencher, broom or grapple attachment. $8000 if you want the auger and 3 bits.

    scott
     
  3. Mike from Canada

    Mike from Canada LawnSite Member
    Posts: 43

    how much to ship to Ottawa, Canada?
     
  4. Landrus2

    Landrus2 LawnSite Platinum Member
    Posts: 4,811

    Are you avail to meet half way :waving:
     
  5. arbor pro

    arbor pro LawnSite Senior Member
    from SD
    Posts: 511

    willing to pay me something for my time and gas? if so, sure. otherwise, i could likely ship this to you for around $800.

    another possibility is I am looking at a new stump grinder in PA. it's a rayco 1635 trac unit. Can't find one around here so having to shop around. If I pull the trigger on it, I may be looking for someone to bring it to me half way. it has its own trailer. I don't know you so we would have to talk some more to find out if this would work but, would you be interested? It's on the east side of PA. Earthborne equipment is dealer.
     
  6. arbor pro

    arbor pro LawnSite Senior Member
    from SD
    Posts: 511

    If I was heading that way to pick up a grinder (see my response to Joesimoes2), I could probably bring it part way. At the very least, I could ship it to NY and you could pick it up there. It would cost a grand at the most to ship to NY. If shipping to Canada, I would have to go through a ton of paperwork and would rather you arrange your own shipping to be honest. NY would be easy though if you could just drive down and take back with you. call me if you want to discuss it further, Mike.

    scott 605-228-9350
     
  7. arbor pro

    arbor pro LawnSite Senior Member
    from SD
    Posts: 511

    just got a quote to ship the sk500 out to PA. it will cost $1200 if guaranteed within 2 weeks and $1000 if you allow 1-2 months. That's by standard flatbed truck. One might be able to get a cheaper quote with uship.
     
  8. DEPENDABLE LANDSCAPING

    DEPENDABLE LANDSCAPING LawnSite Bronze Member
    Posts: 1,343

    Arbor pro.
    What would the shipping be to mass. Cape and cod.
    Posted via Mobile Device
     
  9. arbor pro

    arbor pro LawnSite Senior Member
    from SD
    Posts: 511

    right around $1450.
     
  10. arbor pro

    arbor pro LawnSite Senior Member
    from SD
    Posts: 511

    sk500 mini skid with bucket and grapple reduced to $7k. That's $500 less than I was asking and should hopefully help someone with the cost of shipping or give you some gas money to come pick it up yourself.

    I will hold it for 2 weeks with a deposit of $500 and up to 30 days with a deposit of $1000.

    scott 605-228-9350
     

Share This Page