Dixon ZT 5421 15 amp circut breaker problem

Discussion in 'Mechanic and Repair' started by p62, May 25, 2008.

  1. p62

    p62 LawnSite Member
    Posts: 2

    My Dixon's circut breaker keeps popping. Checked the wiring for breaks. found none. It has an electric clutch. If this needs to be replaced, how would I remove it. Could someone give me step by step instructions. Thank you
  2. Jason Rose

    Jason Rose LawnSite Fanatic
    Posts: 5,858

    I'm not fimiliar with the number 5421, but I know the electric clutches I've worked with in the past on the Dixons were simply attached with 1 bolt in the center and when that bolt was removed it just slid right off the shaft with no real effort. Of course there was the wire to unplug and a bracket to loosen or remove that holds it from spinning, but other than that, it was easier than I thought it would be.
  3. p62

    p62 LawnSite Member
    Posts: 2

    Thank You for your help

Share This Page