Does anyone know who makes this?

Discussion in 'Landscape Lighting' started by klkanders, Jun 10, 2010.

  1. klkanders

    klkanders LawnSite Senior Member
    from Midwest
    Posts: 848

    Does anyone recognize this well light cover? A customer would like a couple new ones. I didn't measure but guessing its about 8" across. This number is stamped on the underside 41110258. Thanks in advance for any help.

    Moonlighting Well Cover.jpg
     
  2. Classic Lighting

    Classic Lighting LawnSite Senior Member
    Posts: 491

    Can't help you, but it looks like it's taken a few hard hits from a mower blade.
     
  3. JCLawn and more

    JCLawn and more LawnSite Fanatic
    from MI
    Posts: 5,206

    don't know how wealthy the customer is, but take it to a steel fabricator and they could make a copy. It won't be cheap.
     
  4. Alan B

    Alan B Sponsor
    Posts: 410

  5. klkanders

    klkanders LawnSite Senior Member
    from Midwest
    Posts: 848

    Alan, Thanks I think you hit it. Yep Gerry should be able to help further.
    Yes another one has met the mower blade a few times also.
    Thanks for the responses!
     
  6. Pro-Scapes

    Pro-Scapes LawnSite Platinum Member
    Posts: 4,181

    Wrong. It looks cast to me not fabicated. Steel would be a very poor choice especially since it is an off the shelf piece that can be had reasonably. Kieth I may actually have 2 here I bought and never used. Drop me an email and I will look.
     
  7. klkanders

    klkanders LawnSite Senior Member
    from Midwest
    Posts: 848

    Billy, It is some sort of plastic or polyester composite as the Hadco website states. Does that describe what you have?
     
  8. klkanders

    klkanders LawnSite Senior Member
    from Midwest
    Posts: 848

    Its a done deal! Terradek had some in stock and they will be on my doorstep shortly.
    Thanks everyone for your assistance!
     
  9. S&MLL

    S&MLL LawnSite Senior Member
    Posts: 751

    IG3H I think is the code


    Wish I came on earlier. Have like 20 of these sitting in the shop..... I stopped using par36 wells
     
  10. klkanders

    klkanders LawnSite Senior Member
    from Midwest
    Posts: 848

    It is for the IL116 which is a MR16 well. Hope so because that is what I ordered.
    IS1H is the optional Glare shield.
    Maybe I acted to quickly.....I was offered up some free ones from someone else. I just had to pay shipping. Thanks R.S.
     

Share This Page