Doubles on my Great Dane

Discussion in 'Lawn Mowing' started by summitgroundskeeping, Jul 30, 2002.

  1. summitgroundskeeping

    summitgroundskeeping LawnSite Senior Member
    Posts: 410

    I'm going doubles on my GD Scamper 48". I can just put the bolt through two sets of blades at 90 degrees and tighten it down right? Or do I need a kit or bracket to hold them in place?
     
  2. bobbygedd

    bobbygedd LawnSite Fanatic
    from NJ
    Posts: 10,178

    how do u like the dane? im thinking of getting one
     
  3. summitgroundskeeping

    summitgroundskeeping LawnSite Senior Member
    Posts: 410

    love it, but someone help me as how to fasten the blades onto the spindles. Just bolt normally or do i need a bracket?
     
  4. accuratelawn

    accuratelawn LawnSite Senior Member
    Posts: 922

    Just put the blades at 90 and tighten the bolt.
     
  5. Phishook

    Phishook LawnSite Bronze Member
    Posts: 1,143

    I'm not sure about the Scamper, but my Charriot has three spacers above the blades. I took one out to compensate for the second blades thickness. Then just tighten.
     
  6. strickdad

    strickdad LawnSite Senior Member
    Posts: 544

    phishook is right on removeing the spacer, we run them on all 4 of our danes
     

Share This Page