1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

Dried concrete on aluminum and paint

Discussion in 'Power Washing' started by crete, Sep 5, 2010.

  1. crete

    crete LawnSite Member
    Posts: 20

    I own a concrete pump truck that has a built in 2200 p.s.i. power washer on it. But I got some concrete build up on the aluminum diamond plate fenders,which I did'nt see. I have tried a turbo nozzle and it won't touch it. My question is this. What kind of p.s.i. would work with a 15 degree tip I will probably rent what ever size I need for a day. I also want to experiment somewhere on the paint where it won't show(trying not to peel the paint) Thanks Terry
     
  2. Mike B.

    Mike B. LawnSite Member
    Posts: 19

    I would not try cleaning the painted area with more pressure than 2000 psi. I have read of a cleaner that will remove dried concrete splatters, but don't remember were I saw it. try a masonry supply store. Good luck.
     

Share This Page