1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

Drilling Holes in Deck

Discussion in 'Mechanic and Repair' started by Skier125, May 6, 2012.

  1. Skier125

    Skier125 LawnSite Member
    Posts: 10

    I want to mount a bracket to the back of my mower's deck it is a lesco wb 48. So I was wondering if theirs any major reason why i shouldn't drill the holes. The holes will be were the belts are or were the blades are. I need the brackets to attach the the striping kit. Should I do this or try mount on the back near the operator instead which is a better idea.
    Thanks for the help I wanted to check first so i only drill once.

    The striping kit http://www.lawnsite.com/showthread.php?t=35589&highlight=Conveyor+Rollers
     
  2. fixer67

    fixer67 LawnSite Silver Member
    Posts: 2,104

    I would put the heads of the bolts on the under side as the heads will not catch grass build up like a nut and bolt sticking down would.
     

Share This Page