Echo weedeater 280t

Discussion in 'Mechanic and Repair' started by kietsterz, Aug 15, 2011.

  1. kietsterz

    kietsterz LawnSite Member
    Posts: 12

    i have a echo weedeater 280t. The problem i have is if i flip it upside down in the edge position then the weedeater run good, but if leave it normal in the weeding position then it lose power. i clean the carb, even replace a new one, clean the tank, exhaust port, but it still have the same problem. Can you guy help me out with this matter. Thanks.
     
  2. dutch1

    dutch1 LawnSite Silver Member
    from Jayhawk
    Posts: 2,231

    Check to see if this happens with a full tank of fuel. If it doesn't then it's possible that when turn the head, the filter is leaving the fuel supply when you're working with less than a full tank. Just a thought.
     
  3. ed2hess

    ed2hess LawnSite Fanatic
    Posts: 12,963

    Have you tried adjusting the high end needle? Usually go fuel filter and breather and then go to the needle adjustment. Be sure to keep ports cleaned. Temp change and a little use causes these kind of problems.
     
  4. rollman

    rollman LawnSite Member
    from Bear DE
    Posts: 74

    Be interested in hearing back how you fixed this problem . Thanks
    Jerry
     

Share This Page