ECS Kit & 44" Deck on TTHP

Discussion in 'eXmark' started by ULTIMATE LAWN, Jul 30, 2003.

  1. ULTIMATE LAWN

    ULTIMATE LAWN Banned
    from AL
    Posts: 656

    Hello,

    I would like to add ECS kits to my T-Bar hydro WB's. After running the Hydro ECS units we are finding the Toro's to be painful to use.

    Also, I need a 44" hydro WB for a cemetary job (The LHP 44" Won't Work).

    Is it possible to possible to put the 44" deck on a 48" TTHP tractor?
     
  2. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    ULTIMATE LAWN:

    No, you can't put the 44" LHP deck on the 48" TTHP frame. The reason is because of the way the deck hangs. On the LHP, the deck hangs from chains, and on the TTHP, the deck hangs from the pins. Could you make it work? Anything is possible with a little bit of time and a lot of money, but I wouldn't want to do it.

    You said that a 44" LHP won't work. What about the 44" Lazer CT? The width of the two units is the same, but the LCT is about 110 lbs. lighter and an inch shorter. Just a thought. . .

    I don't think you could add the ECS handles to your T-Bar Toros. There's no conversion kit, and I don't think the engine decks are the same. Could it be done? I suppose so, but it would probably be less expensive to just purchase a new Turf Tracer HP ;^). Let me know if you have any other questions.

    Here to help,

    Dustin
    Exmark Customer Service
     

Share This Page