Electric OCDC for triton deck exmarks

Discussion in 'Marketplace' started by kc2006, Oct 21, 2006.

  1. kc2006

    kc2006 LawnSite Silver Member
    Posts: 2,442

    I have a homemade electric OCDC for a triton deck exmark. I built this in the spring for my 06 lazer but I dont have the mower now and it won't fit on my ultracut that I have. It works well, the control box is not water tight but I never had a problem with it. Theres also a quick disconnect on the positive wire so you can unplug it at night so it doesnt draw on the battery. The chute itself can be stoped wherever you want, as in partially closed/open. The chute is made of 1/4" plate, in the picture the bracket that holds the motor is bent, I straightend it and put a brace in there so it's good to go. The button to control it mounts to the steering stick of the mower, so you don't have to use your foot or take your hand off the controls. It works really nicely that way.

    I'd like to get $100 plus shipping for it. I used it for I believe 30 hours with no issues.

    ocdc.JPG
     

Share This Page