hi guys, big news this morning. today i bought a 6x8 trailer!!!!!!! it was previously used as a pop up camper, he took that off which leaves the frame and tires now. title says its rated for 3,000 lbs, but that was as a camper so dont really no now. it has surface rust in a lot of spots, but i figure some rustolium (sp) or something like that will take care of that, and i also am going to paint it. i plan on putting a wooden deck (1" plywood sound good?) and sides on it. it has wiring (looks good to) but no lights. if im correct at pepboys i can buy full kit for $20. it has a front jack with wheels, and it looks like it has two jacks (left and right) in the back. it has a spare tire and all tires look good. also the deck goes past the wheels, he gave me the covers for the wheels (deckover trailer?) so on the outter sides of the wheels i plan on building tool boxes (big) for gas cans, trimmers, blowers etc. i would make them lockable also and as watertight as possible. it also has the triangle type tongue which i plan on putting toolbox on. so figure 3 good size toolboxes,should hold all hand equipment both powered and non powered, and leaves a good 4x8 area for ride on equipment and push equipment. sound like a plan? looking for good toolbox designs and so on.