Exmark HP 48 Chaniging Oil

Discussion in 'eXmark' started by grombka, Jun 7, 2007.

  1. grombka

    grombka LawnSite Member
    Posts: 1

    I have a Exmark HP with a Kohler 18. The current arrangement to drain the oil is a plug underneath the frame. This is on top of an axle rod and the end result is oil everywhere.

    Is there a quick disconnect modification that will fit this model?
     
  2. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Hello,
    Grombka,

    Thanks for writing in. We do have a couple of options that we used on later model units. One is a t-valve drain and the other is basically a hydraulic hose with a plug, which is what we use now and what I'd recommend.

    The part number for this is 109-0876.

    I hope this helps. Let us know if you have any questions.

    Lenny
     

Share This Page