exmark L/C Cooling problems

Discussion in 'Lawn Mowing' started by jnmaney, May 3, 2001.

  1. jnmaney

    jnmaney LawnSite Member
    Posts: 12

    the connector that goes to the thermostat on our new Lazer fell off today and things got a little hot... Wondering if anyone has had similar problems.
  2. Eric ELM

    Eric ELM Husband, Father, Friend, Angel
    Posts: 4,831

    I have a question for you LC owners, what temperature are these gas engines running at when it's around 90 degrees out like it was here today.

    My Yanmar diesel runs about 190 to 200 degrees when it's that hot.
  3. TLS

    TLS LawnSite Fanatic
    Posts: 7,937


    I really cant tell you! As the gauge that my Lazer comes with is just a C---TEMP---H gauge! They mind as well have put an idiot light on it! I was thinking about installing a "real" gauge, but was concerned with the sending unit and all that. I do know that it only moves about a 1/8" off of cold even in todays high 80's. The cooling fan is ALWAYS on, so on cold days, its probably real cool running. The wavy radiator screen never fills up and blows off from job to job on the trailer.

  4. Eric ELM

    Eric ELM Husband, Father, Friend, Angel
    Posts: 4,831

    Thanks for the reply Dixie1. The cooling fan on my Chopper runs all the time also and on cool days, it runs about 170 at tops, but on cold days, it will warm up the hands. :)

Share This Page