Exmark Lazaer HP Electrical problem

Discussion in 'Mechanic and Repair' started by scott's turf, Jul 11, 2007.

  1. scott's turf

    scott's turf LawnSite Senior Member
    from NH
    Posts: 949

    Need help diagnosing this problem. The mower will start and the parking brake can be release but once you pull the handles in the mower stalls. I think the problem is the the switch on the brake but before I drive all over tomorrow I wanted to see what some other people thought.
     
  2. khouse

    khouse LawnSite Bronze Member
    Posts: 1,465

    Bypass the seat switch and try it.
     
  3. scott's turf

    scott's turf LawnSite Senior Member
    from NH
    Posts: 949

    The seat switch was the first thing I tried. I have had that happen before. I had to call around this morning to half dozen shops and finally found the brake switch. Will have it hooked up later this morning. Hopefully that is the answer.
     
  4. scott's turf

    scott's turf LawnSite Senior Member
    from NH
    Posts: 949

    :dizzy: well, I'm in a pickle now. The new switch I got didn't cure the problem. Now I am wondering if it is just a bad contact somewhere since I was able to get it to work for a shot time yesterday afternoon. The lawns are starting to back up
     
  5. scott's turf

    scott's turf LawnSite Senior Member
    from NH
    Posts: 949

    Found the problem, Something actually came unplugged. My last ditch effort was to unplug and replug every connection I could find and in that process I found a connection not fully engaged. Problem solved!
     

Share This Page