Exmark Metro 48 won't shut off

Discussion in 'Lawn Mowing' started by mbundy82, Jan 29, 2012.

Tags:
  1. mbundy82

    mbundy82 LawnSite Member
    Posts: 4

    I have a 98 Exmark Metro 48 w/ 15hp Kohler. The mower runs great, but the only way to get it to stop running is to shut off the fuel. We have checked all the wiring and everything seems to be okay. Any suggestions on where to begin would be very helpful.
     
  2. Richard Martin

    Richard Martin LawnSite Fanatic
    Posts: 14,700

    Last edited: Jan 29, 2012
  3. mbundy82

    mbundy82 LawnSite Member
    Posts: 4

    Thanks, we have looked at the manual several times and have checked all the wiring to make sure none of the wires were broken and that they were all properly connected. We have even tried running a jumper from the kill terminal on the coil directly to ground and it still won't shut off. My fear is that the coil is not working properly. I just hate to spend $52 on a new one if it isn't broken.
     
  4. Richard Martin

    Richard Martin LawnSite Fanatic
    Posts: 14,700

    If the magneto wasn't working properly it wouldn't run but...

    If you cannot shut the engine off by grounding the ignition at the kill terminal on the magneto then there is a problem with the magneto. R&R the magneto.

    Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth.
     

Share This Page