Exmark Metro Questions

Discussion in 'eXmark' started by MJR_63, May 18, 2007.

  1. MJR_63

    MJR_63 LawnSite Member
    Posts: 98

    I have a 2006 Exmark Metro gear drive. When I push it in neutral it makes a clicking sound on the left side. I think it makes this sound while the machine is operating but I can't hear it over the motor.

    Also, I have heard to make good stripes the front of the deck should be a 1/4 inch lower then the rear. Can someone tell me how to change this. I have 2 washers on the top spindle and 2 washer on the bottom spindle. My rear axel adjustment hole is in position "D".

    Thanks!
     
  2. MJR_63

    MJR_63 LawnSite Member
    Posts: 98

    Update: I found out what was making the clicking sound...It seems like the left hand brake shoe makes a loud clicking sound when I push the mower forward...The brake rod seems to be adjusted correctly. Could it be a bent break shoe? Any ideas? Thanks!
     
  3. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Hello,
    Yes we would recommend checking the brake shoe or the scrapper. If ether part is slightly bent, you can straighten them back out to their original alignment.

    Christie Moore
    Exmark Customer Service
     

Share This Page