External Pond Pumps for Sale

Discussion in 'Marketplace' started by horizonlandscape, Mar 12, 2010.

  1. horizonlandscape

    horizonlandscape LawnSite Member
    from usa
    Posts: 30

    I have a few External Pond Pumps that I would like to sale. Please send me a pm if interrested in purchasing one of these pumps. All pumps are new in box with factory warranty.

    2 - ES3500 - 3500 gph @ 5' - 1.3 amps - 115 volts - 143 watts - 2" in/out - $187.00 (free shipping)

    2 - ES5500 - 5500 gph @ 5' - 2.6 amps - 115 volts - 286 watts - 2" in/out - $196.00 (free shipping)

    1 - ES8500 - 8500 gph @ 5' - 3.3 amps - 115 volts - 363 watts - 2" in/out - $206.00 (free shipping)

    2 - ESHF8400 - 9600 gph @ 5' - 12.4 amps - 115 volts - 1364 watts - 2" in/out - $200.00 (free shipping)


    Thanks,
    John
     
  2. ponyboy

    ponyboy LawnSite Bronze Member
    from ny
    Posts: 1,414

    Can I see a pic of es 8500
    Posted via Mobile Device
     
  3. ponyboy

    ponyboy LawnSite Bronze Member
    from ny
    Posts: 1,414

    Are these self priming
    Posted via Mobile Device
    Posted via Mobile Device
     
  4. horizonlandscape

    horizonlandscape LawnSite Member
    from usa
    Posts: 30

    Picture of ES series pump.

    es-s.jpg
     
  5. horizonlandscape

    horizonlandscape LawnSite Member
    from usa
    Posts: 30

    These are not self priming. I do have a few higher end pumps that I would be willing to part with that are self priming. Just let me know what flow rate you need so I can see if I have one that would work for your application.

    John
     
  6. ponyboy

    ponyboy LawnSite Bronze Member
    from ny
    Posts: 1,414

    I need 7800 hph give or take
    Posted via Mobile Device
     
  7. DUSTYCEDAR

    DUSTYCEDAR LawnSite Fanatic
    from PA
    Posts: 5,137

    Do u have skimmer baskets for these?
     
  8. horizonlandscape

    horizonlandscape LawnSite Member
    from usa
    Posts: 30

    I have a self-priming ESS7800 for $332.00 (shipping not included). The best buy would be the ES8500 because even with a self-priming pump you still have to install a check valve on the suction line unless the pumps sets below water level (flooded suction).


    John
     
  9. horizonlandscape

    horizonlandscape LawnSite Member
    from usa
    Posts: 30

    Yes I do have some of the 2" and 3" priming pots/debris traps on hand. The 2" will handle pumps up to 6000 gph and the 3" will handle up to 14,000 gph of flow.

    John
     
  10. horizonlandscape

    horizonlandscape LawnSite Member
    from usa
    Posts: 30

    Still have the pumps for sale.


    John
     

Share This Page