Separate names with a comma.
Discussion in 'Trucks and Trailers' started by one man gang, Mar 8, 2006.
Does anyone have pics of home made gate lift(and any other trailer add ons) Thanks
There's many threads on this subject which got me motivated to do mine.
I just finished mine the other day. Still needs some paint.
Mine was pretty simple since my trailer already used tubes for the top rails.
I used one 160lb spring per side. Can lift with one finger now. Should of done this 5 years ago when I bought the trailer.
a more recent one......
Do a search, I have pics of mine on here.....somewhere!
Here is the thread where I posted some pictures of the ez lift gate assist I made. I have used it for 3 years with no problem.
Use only the best grade materials.
I hope this helps, kenny.
Thanks alot guys!!!
Dudes, just figured out how to do the direct search. I was doing it one at a time(taking forever). But thanks again for all your help(and patience)
I have the EZ-Gate on mine I think it was about $150.00 at the time. When I first got it I thought it was kind of "cheap" looking, but Im going on my fourth season with it and it still looks and works like brand new.
Put on one side today. I went with the Square tube(kinda loud) and could only find garage pullys but it works and will be a lot better with the other side done.
Post your pictures.
I went with the square tube because it fit the top rail of my trailer perfectly and I could just bolt it on.
You can get some good [safe] pullies at a hardware store.