1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

f350 fuse help

Discussion in 'Trucks and Trailers' started by supercuts, Nov 8, 2011.

  1. supercuts

    supercuts LawnSite Silver Member
    Posts: 2,784

    hi, anyone know which fuse in a 2000 ford super duty works the trailer running lights. i pulled every fuse and and they all look good. is it one of the large square ones? a number from the fuse box cover would be greatly appreciated. ive check both fuse boxes, under the hood and by the e-brake.

    quick advice, dont be stupid in the dark and put the trailer plug in upside down.
     
  2. AI Inc

    AI Inc LawnSite Fanatic
    Posts: 25,151

    should be a 20 amp in position 6 by the ebrake.
     
  3. supercuts

    supercuts LawnSite Silver Member
    Posts: 2,784

    thank you. that fuse was bad, i replaced it and they still dont work....ill recheck it again
     
  4. Patriot Services

    Patriot Services LawnSite Fanatic
    Posts: 12,441

    Find out why the fuse blew. Usually a chaffed or pinched wire on the trailer.
    Posted via Mobile Device
     
  5. supercuts

    supercuts LawnSite Silver Member
    Posts: 2,784

    as stated in the original post, i managed to ge tthe plug in upsidedown in the dark
     
  6. Patriot Services

    Patriot Services LawnSite Fanatic
    Posts: 12,441

    Make sure the new fuse didn't blow. Use a test plug or light to rule out the end on the truck. Its possible the trailer plug or a wire fryed before overloading the fuse.
    Posted via Mobile Device
     

Share This Page