fastrack steering levers

Discussion in 'Hustler Turf Equip (Archived)' started by btcva19, Jun 4, 2006.

  1. btcva19

    btcva19 LawnSite Member
    Posts: 3

    I have a problem of the steering levers ends hitting each other. Is there an easy fix for this? I have the levers all the way up.
    I was told by a person that works at the dealer I bought my machine from that you could clean the screens in the hydros instead of replacing them, I have not had them apart so any comments on this?
     
  2. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    The screens can be blown out and cleaned, but for what they cost I would replace them, since you are going through the process anyways.
    As to the levers, they may need to be bent out just a hair, there is no adjustment in this area.

    Pj
     
  3. sawman65

    sawman65 LawnSite Senior Member
    Posts: 751

    has the stiffing kit been added to that mower? i have seen cracks around the lever openings before but there is a kit for it.
     
  4. btcva19

    btcva19 LawnSite Member
    Posts: 3

    No kits have been added to this machine. I took mower consultants suggestion and bent them out a little. Thanks!
     

Share This Page