Fimco Meets Blazing Saddles

Discussion in 'Irrigation' started by FIMCO-MEISTER, May 2, 2008.

  1. Added a zone for a 10,000.00 Tree that was lifted over the house and planted in the backyard. I'm using RB XPCN fulls for the watering. Anyway the landscapers rerouted the section line around the tree and left out the two fulls that were in that area. I had a bag of 1" blazing saddles from a DIA meeting sitting in my garage from a year ago. So I figured I'd give them a shot. Made for a fast install. No leaks. They stick up a little high but swing jointing the head down was no problem. I can see how these could really speed up system renovation work.





  2. Wet_Boots

    Wet_Boots LawnSite Fanatic
    Posts: 47,997

    Class pipe?
  3. You Betcha, This is Texas. Class 200
  4. Wet_Boots

    Wet_Boots LawnSite Fanatic
    Posts: 47,997

    So, the second pic shows a cleanup tool? Not part of the poly-pipe demo.
  5. I think you are referring to the cranking tool. Fits over the insert and makes the screwing in part easier.
  6. Wet_Boots

    Wet_Boots LawnSite Fanatic
    Posts: 47,997

    Why, in our day, we didn't have a cranking tool. This younger generation!
  7. Tom Tom

    Tom Tom LawnSite Bronze Member
    Posts: 1,278

    Is that a temporary setup to get the tree re-established?
  8. Established may be a better word. After it is established nature and the system will take care of things.

Share This Page