fixture search

Discussion in 'Landscape Lighting' started by INTEGRA Bespoke Lighting, May 6, 2012.

  1. INTEGRA Bespoke Lighting

    INTEGRA Bespoke Lighting LawnSite Platinum Member
    Posts: 4,102

    I have a need for a couple of natural brass / copper finished, flush mount, louvered "step lights". I would like to use the Coppermoon CM.835-NAT but that finish is no longer available. Do you know of other similar fixtures in the raw or natural finish?

    http://www.coppermoon.com/products/deck_surface_step/cm-835.php
     
  2. Richie@

    Richie@ LawnSite Member
    Posts: 187

    James,

    I don't know it these are up your alley but here is a link I just found.

    http://www.shopwiki.com/l/natural-brass-/-copper-finished-deck-light?sb=1
     
  3. INTEGRA Bespoke Lighting

    INTEGRA Bespoke Lighting LawnSite Platinum Member
    Posts: 4,102

    Thanks for that. Not exactly what I am looking for. I really would like the same shape and form as the CM835 only in a natural brass finish.
     
  4. Richie@

    Richie@ LawnSite Member
    Posts: 187

    No luck here today , but if you find that fixture please post it or pm it.

    Thanks
     
  5. INTEGRA Bespoke Lighting

    INTEGRA Bespoke Lighting LawnSite Platinum Member
    Posts: 4,102

    Yes I will. I still have not found one after 1.5 hours searching online. Everything is in the bronze finish. Not sure why they dropped the natural brass finish on this one fixture.
     
  6. Richie@

    Richie@ LawnSite Member
    Posts: 187

    I'm seeing the same thing.
     
  7. S&MLL

    S&MLL LawnSite Senior Member
    Posts: 751

    James i have 3 in inventory if you find more elsewhere u can have these 3
    Posted via Mobile Device
     
  8. S&MLL

    S&MLL LawnSite Senior Member
    Posts: 751

    Actually nevermind. They are patina-ed already
    Posted via Mobile Device
     
  9. LLC RI

    LLC RI LawnSite Member
    Posts: 149

    James,

    Why can't you use raw brass and just let it weather naturally? What about letting it weather and then clear coating it? Have you asked Doug at Coppermoon if they can make you some in the finish you want?

    If your base metal is what you want, I would imagine the desired finish could be had.

    George
     
  10. INTEGRA Bespoke Lighting

    INTEGRA Bespoke Lighting LawnSite Platinum Member
    Posts: 4,102

    George. That is what I am looking for... Raw or Natural Brass finish. I want it to patina over time. All of the factory 'bronze' finishes are too dark. Coppermoon has discontinued the natural brass finish for this fixture, but Doug has been very resourceful and helped me out by finding some old stock. This one is solved.
     

Share This Page