Fixture Suggestions - 120V HID In-Grade

Discussion in 'Landscape Lighting' started by INTEGRA Bespoke Lighting, Jan 2, 2012.

  1. INTEGRA Bespoke Lighting

    INTEGRA Bespoke Lighting LawnSite Platinum Member
    Posts: 4,102

    I am desgining a retrofit system for the facade of a shopping mall and am looking for recommendations for commercial spec., 120V, HID, in-grade (flush) fixtures.

    Currently considering the CO2 and HP2 from BK, and the IG7 from Vision3.

    I would like to use either GX10 MR16 MH or T4 MH lamps inside.
    As this is a retrofit and some of the fixtures will need to be cored into existing concrete sidewalks, the fixtures will have to be round with no appendages sticking off the sides like the Lumiere Monaco has. Ideally brass, bronze or stainless steel construction.

    I have looked at Hydrel, KIM, Vista, Hevilite and HK as options but not found much that will work from them.

    If you have any recommendations, please share.
    Thanks
     
  2. electric

    electric LawnSite Member
    Posts: 172

    Posted via Mobile Device
     
  3. starry night

    starry night LawnSite Silver Member
    Posts: 2,669

    :) :canadaflag:
     
  4. INTEGRA Bespoke Lighting

    INTEGRA Bespoke Lighting LawnSite Platinum Member
    Posts: 4,102

    Thanks for the tips "Electric", I will take them under advisement. *chuckle*
     
  5. S&MLL

    S&MLL LawnSite Senior Member
    Posts: 751

    How much output do you need? Almost everything I have seen leaks over time. The local postoffice had some hydrel fixtures maybe 5 years old and recently took them out and filled in with concrete.

    Why not put something fully potted in that is led. There are a bunch of 27watt led 12volt fixtures out there.
     
  6. INTEGRA Bespoke Lighting

    INTEGRA Bespoke Lighting LawnSite Platinum Member
    Posts: 4,102

    I am just doing the design and spec. for this job. The installation will be done by others. The vertical elements are very tall, at around 40' and there is significant ambient light from street light fixtures, hence the need for the punch of the HID lamps. I only want to use spec. grade, 120V, architectural fixtures on this project that come with full IES photometrics. The line voltage is available and already in the ground nearby.

    Thanks
     

Share This Page