Flush Mount Well

Discussion in 'Landscape Lighting' started by jshimmin, Apr 29, 2010.

  1. jshimmin

    jshimmin LawnSite Member
    Posts: 99

    I'm looking for an MR-16 well fixture that can be flush mounted into concrete. We used to use a Vista model but they changed the design to make it a pain to service the bulb if needed.
    Unit needs to be mounted so that a shovel or sweeper can go over it without hitting it.
     
  2. INTEGRA Bespoke Lighting

    INTEGRA Bespoke Lighting LawnSite Platinum Member
    Posts: 4,102

    Jim, what MR16 well light cannot be flush mounted? Most manufacturers offer up a concrete pour sleeve that you pre-wire to and then go back once the concrete has cured and pop the fixture in.
     
  3. Pro-Scapes

    Pro-Scapes LawnSite Platinum Member
    Posts: 4,181

    Jim,

    I have used ALOT of unique novas in this application. It comes with a pour sleeve in the box and you can make preperations for it to be 100% flush if you desire.

    Kim mini vaults are another excellent solution especialy for high traffic areas. These are both fully enclosed sealed fixtures we have used in the past. The kims are built like a tank
     
  4. emby

    emby LawnSite Senior Member
    from Ontario
    Posts: 380

    http://www.hunza.co.nz/product-index/dwl.html
     
  5. ELumin8

    ELumin8 LawnSite Member
    Posts: 59

    Check out either the kim light vaults or the BK adjustable well star.
     

Share This Page