Found:Boots understudies @ work in Massachusetts

Discussion in 'Irrigation' started by CAPT Stream Rotar, Jun 29, 2008.

  1. CAPT Stream Rotar

    CAPT Stream Rotar LawnSite Fanatic
    Posts: 5,959

  2. Wet_Boots

    Wet_Boots LawnSite Fanatic
    Posts: 48,014

    Ahhh, the ancient art of Valve Stacking....
     
  3. nylan8888

    nylan8888 LawnSite Member
    Posts: 137

    That there's pure custom !
     
  4. Waterit

    Waterit LawnSite Silver Member
    Posts: 2,913

    I'm sure Fimco will agree - if not for the 90 over the other valve, installer could've used 2 (6") boxes!!!:laugh:
     
  5. CAPT Stream Rotar

    CAPT Stream Rotar LawnSite Fanatic
    Posts: 5,959

    I think there was another valve in there somewhere.

    just couldn't find it..

    notice the slight leak of the dura manifold T.


    F-
     
  6. Wet_Boots

    Wet_Boots LawnSite Fanatic
    Posts: 48,014

    They should know better than to try to copy the master...
    [​IMG]
     
  7. Mike Leary

    Mike Leary LawnSite Fanatic
    Posts: 22,070

    Guess which solenoid will go bad. :hammerhead:
     
  8. WalkGood

    WalkGood LawnSite Bronze Member
    Posts: 1,910


    Solenoids are easy to replace in Boots' manifold. :clapping:


    On another point..... looks like an un-crimped clamp from this pic, Ed. ;)

    bootspic.jpg
     
  9. WalkGood

    WalkGood LawnSite Bronze Member
    Posts: 1,910

    So, did you fix this manifold leak Ed?
     
  10. Tom Tom

    Tom Tom LawnSite Bronze Member
    Posts: 1,278


    those duras don't need teflon on the ends with the o-ring
     

Share This Page