FS: 14x5 single axle trailer

Discussion in 'Marketplace' started by brookline, Mar 19, 2010.

  1. brookline

    brookline LawnSite Senior Member
    Posts: 314

    I have a 14' x 5' single axle trailer with new lights newer paint and good tires. I also welded channel in the sides to put up plywood sides when needed in about 5 minutes very easy to convert. Also has a 3 place trimmer rack. The trimmer rack and channels are home made but the trailer is not. Very good condition. Could use some new wood in a few yaers but nothing immediate. $1100 obo.
     
  2. brookline

    brookline LawnSite Senior Member
    Posts: 314

  3. brookline

    brookline LawnSite Senior Member
    Posts: 314

    Picture 015.jpg

    Wood sides are loosely in there now usually the front and front two side boards have a screw through them into the 2x4 you see pictured in the front corner pic and sits nice and tight. A little too wet currently for me to pull it out of the back yard and clean it up with out putting ruts in the yard for pics so I apologize. The front box locks and has a place for a small hedge trimmer inside and a back pack blower with the tube hanging out the hole on the drivers side of the box.

    Picture 015.jpg
     
  4. brookline

    brookline LawnSite Senior Member
    Posts: 314

    Bump nice trailer
     
  5. brookline

    brookline LawnSite Senior Member
    Posts: 314

    morning bump
     

Share This Page