FS: New 23hp Kawa/52" float deck (Surper Surfer/Scorpion)

Discussion in 'Marketplace' started by aubdeer, May 31, 2007.

  1. aubdeer

    aubdeer LawnSite Member
    from midwest
    Posts: 33

    This mower has same spec's as the current Gen II Great Dane Super Surfer or EverRide Scorpion stand-on model. It was produced as a prototype by the factory and the only difference is color. This unit is absolutely brand new and has never cut grass! Hour meter reads 0.9 hours due to manufacturing set up and a short photo session. Service parts are readily available from any Great Dane or EverRide dealer. This is a one-of-a-kind that will certainly turn heads!!:clapping:
    First $5,000 take it!
    Contact via PM or (402)-274-7170 leave message



    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    MOWER - 52"
    Engine Kawasaki® 23hp - FH680V
    Displacement - 41.2 cid (675 cc)
    Horsepower - 23 hp (17.2 kW)
    Maximum Torque - 40.2 lb-ft (51.8 N-m)
    Maximum RPM - 3600
    Bore - 3.15 in (80.0 mm)
    Stroke - 2.99 in (75.9 mm)
    Cylinders - V-Twin
    Type -Air Cooled

    FUEL
    Type - Gasoline Regular Unleaded Gasoline (Minimum 87 Octane)
    Fuel Tank Capacity - 6 US Gal (22.7 L)

    HYDROSTATIC DRIVE SYSTEM
    Steering - Two Hand Control Levers, True Zero Turn

    TIRES
    Rear 20 x 8 - 8
    Front 13 x 5 - 6

    TRAVELING SPEED
    Forward 0 - 9 mph (14.5 km/h)
    Reverse 0 - 4.5 mph (7.2 km/h)
    Transmission Two Axial Piston Pumps - Two Fixed Wheel Motors
    Hydraulic Capacity 3.3 US qts (3.1 L)

    ELECTRICAL SYSTEM
    Battery 12V 340 CCA
    Charging System Charge Coil
    Charging Output 15 Amp
    Starter 12V Electric - Bendix Type
    Fuses 20 Amp

    MOWER DECK
    Mower Type Side Discharge
    Cutting Width 52 in (1321 mm)
    Cutting Height (.5 in Increments) 1.5 to 4.5 in (38 to 114 mm)
    Blade Length 18 in (457 mm)
    Number of Blades 3

    WEIGHTS / MEASUREMENTS
    Weight 930 lbs (422kg)
    Overall Width 63 in (1600 mm)
    Wheelbase 46 in (1168 mm)
     
  2. vkr

    vkr LawnSite Member
    Posts: 15

    Are you open to offers on this machine?
    Where are you located?
     
  3. aubdeer

    aubdeer LawnSite Member
    from midwest
    Posts: 33

    This machine is already $1500 under the MSRP price, but I am willing to entertain offers or trades. I am confident that with current interest in the stand-on units that I will not have a problem selling this unit for $5,000. It comes with a service and parts manual for both the Everride Scorpion and Great Dane Super Surfer and is BRAND NEW. The unit is located in Auburn, NE and shipping can be arranged at the buyers expense.
     
  4. thebeans

    thebeans LawnSite Member
    from SW, VA
    Posts: 50

    Interesting...I've been looking at the standers. How much for shipping to 24293 commercial location with a loading dock / forklift. Can you take Paypal? Thanks.
     
  5. aubdeer

    aubdeer LawnSite Member
    from midwest
    Posts: 33

    I will have to wait until monday to check on shipping but I will let you know as soon as possible...
     
  6. corey4671

    corey4671 LawnSite Silver Member
    Posts: 2,931

    pretty sure you can buy one brand new off showroom for 4995
     
  7. Mower For Less

    Mower For Less LawnSite Senior Member
    Posts: 823

    What about warranty? Does it come with one? And if it does, will there be any problems with a local dealer honoring it?

    If not, seems like the price should be a lot less to compensate for that fact.

    Kevin
     
  8. aubdeer

    aubdeer LawnSite Member
    from midwest
    Posts: 33

    The unit you are talking about buying for $4995 is a 19HP Kawasaki Kai with a 52" fixed deck in either the Great Dane Surfer or Everride Scorpion FX. This unit has the 23 HP big block Kawasaki and a 52 inch float deck and is just like the Everride Scorpion or Great Dane Super Surfer.
     
  9. aubdeer

    aubdeer LawnSite Member
    from midwest
    Posts: 33

    No, the unit does not come with any warranty, but you would receive a parts manual for it that would allow you to order parts from any Great Dane or Everride dealer.
     
  10. vkr

    vkr LawnSite Member
    Posts: 15

    You'll have to come down on your price considerably since there is no warranty.
     

Share This Page