1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

FS: Toro DFS bagger/weights/etc. - CHEAP

Discussion in 'Marketplace' started by Durney, Jul 12, 2008.

  1. Durney

    Durney LawnSite Member
    Posts: 11

    Bought a Z mower from a member here and the DFS system came with it. I wont ever use it so for sale it goes. I looked it over closely and printed out the parts listing from Toro, its all there. The only things I see are the jackshaft bearings look loose (brgs. cost $18.16) and there is a small hole in the bottom where it got melted, but easily patched with a 2" sheetmetal and pop rivets. Its pn 78491 and fits the 200 series Z-masters. I called Toro directly (tech dept.) and after a LONG wait they came back saying it WILL fit the 500 series Toro Z's.


    It sold originally for 2179.00 so how about 850.00??? The last one sold on Ebay used for 1120.00 so thats where it will go next if you guys dont want it.

    contact Scott @ 586-549-1121 or PM

    pics to follow [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. lawnboy858

    lawnboy858 LawnSite Senior Member
    Posts: 344

    Will it fit a z400?
     
  3. Durney

    Durney LawnSite Member
    Posts: 11

    Dont see why not , and knowing your local dealer and Toro want to tell you no so you buy a new one, I would still check first. Remember, the only parts that actually bolt to the frame are the two side plates shown in the first pic. Then the rear plate bolts to those and the bagger/jackshaft/etc. hangs off that. So even if you have to reposition the two side plates I would think it would fit most all full size Toro/Exmark Z's.
     
  4. qualitylawnpro

    qualitylawnpro LawnSite Senior Member
    Posts: 543

    Are you willing to ship to 42001?
     
  5. Durney

    Durney LawnSite Member
    Posts: 11

    Sure I will ship it anywhere in the conus ...at the buyers cost.

    I think this will all fit on one pallet and I ship LTL all the time but its not cheap anymore.

    try places like freightquote.com or any of the other brokers.
     
  6. Durney

    Durney LawnSite Member
    Posts: 11

    Got a quote off freight broker for 174.88 to St Louis.... FYI.

    Even adding shipping in this is a steal guys...fall cleanups are coming!
     
  7. Durney

    Durney LawnSite Member
    Posts: 11

    Bump before it goes to ebay.... make an offer.
     
  8. qualitylawnpro

    qualitylawnpro LawnSite Senior Member
    Posts: 543

    850 and u pay shipping to 42001?
     
  9. Durney

    Durney LawnSite Member
    Posts: 11

    Qualitylawnpro....call me and leave your phone # if I cant answer. I need more info on your location.
     
  10. Durney

    Durney LawnSite Member
    Posts: 11

    On ebay now.... even cheaper. I can end the auction for a reasonable price and I accept paypal (plus the 3% fee of course)
     

Share This Page