G6 blades for a Lazer Z

Discussion in 'Lawn Mowing' started by BLC14, Jan 25, 2013.

  1. BLC14

    BLC14 LawnSite Member
    Posts: 108

    Hi, I just purchased an Lazer Z and looking to find the g6's because I've heard a lot of good about them. If anybody has other suggestions of blade type im all ears. I mow in Eastern PA so trying to prevent double cutting is HUGE. I've been looking for the last couple days and cant find the ones for my machine, any help is greatly appreciated. :waving:
    Model Number:LZX27KC606
     
  2. BLC14

    BLC14 LawnSite Member
    Posts: 108

    Bump, anybody's response is greatly appreciated!
     
  3. BLC14

    BLC14 LawnSite Member
    Posts: 108

    Here's a pic of my new mower

    314143_10200439517536478_1664665719_n.jpg
     
  4. Schrock Lawns

    Schrock Lawns LawnSite Senior Member
    Posts: 944

    Jack small engine I think might have them theirs sponsors on this site who might have them also try ebay
    Posted via Mobile Device
     
  5. Richard Martin

    Richard Martin LawnSite Fanatic
    Posts: 14,700

    Measure your current blade and post the measurements here. Measure the center hole size and from sharpened blade tip to sharpened blade tip. I'm thinking it should be a 20.5" blade with a .625" (5/8") center hole.
     
  6. weaver

    weaver LawnSite Bronze Member
    Posts: 1,276

    Newer Lazer's have a 15/16 in center hole...
     
    Last edited: Jan 27, 2013
  7. weaver

    weaver LawnSite Bronze Member
    Posts: 1,276

    I just used the Exmark # and typed it in Ebay's search engine and here's what they have...


    http://www.ebay.com/sch/i.html?_trksid=p5197.m570.l1313&_nkw=103-6398&_sacat=0&_from=R40
     
  8. BLC14

    BLC14 LawnSite Member
    Posts: 108

  9. weaver

    weaver LawnSite Bronze Member
    Posts: 1,276

    Those will fit.. newer lazers have 15/16 in center and that's the correct length also... Go to exmark.com quick refrence parts and cross #s....
    Posted via Mobile Device
     
  10. BLC14

    BLC14 LawnSite Member
    Posts: 108

    Ok so I found the blade number and there aren't any G6's made that match up with it,the difference is the g6's are 20 3/4 while the ones I need are the 20.5 and my next and final question is whats the difference between the normal gators and the g6's, are the gators worth it?
     

Share This Page