Gateway height adjustment

Discussion in 'Great Dane' started by hartlawnmain, May 1, 2004.

  1. hartlawnmain

    hartlawnmain LawnSite Member
    Posts: 66

    I'm wondering what is the proper set-up for the 52" Gateway as far as height? I want to cut between 3-3.5"(Fescue). The rear wheels are in the middle position. It certainly appears that the rear is more than 1/4" higher than the front with the front casters lowered all the way. Should I lower the rear wheels one notch (1/2")? I won't be using if at any other heights enough to have to worry about adjusting it anymore. The manual is pretty vague as to which settings to use for this.
     
  2. James Froh

    James Froh LawnSite Member
    Posts: 18

    Hi,
    The height should be higher in the back then the front and a 1/4" is acceptable pitch.
    Jim
     

Share This Page