1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

Gator Blades for scag

Discussion in 'Lawn Mowing Equipment' started by T Scapes, Apr 23, 2013.

  1. T Scapes

    T Scapes LawnSite Bronze Member
    Posts: 1,190

    I am looking for a link for gator blades for my 2012 scag tiger cat with a 61in deck
     
  2. Ridin' Green

    Ridin' Green LawnSite Fanatic
    Male, from Michigan
    Posts: 12,852

    Sroll down to the Scag section about 3/4 of the way down and take a look.

    They show 3-1 high lifts which have the same exact lift as the G6's, but are thinner so they don't weigh as much, and they don't have as long a cutting edge, part # 96-347.

    They also have the G5's which are the exact same as the G6, but are also thinner, part # 596-347.

    Last they show the G6, part # 396-727-

    http://www.oregonproducts.com/pro/pdf/OREGON_BladesByOEM.pdf
     
  3. weeze

    weeze LawnSite Fanatic
    Posts: 7,795

    yes scag 61" deck G6 part number is 396-727

    i'm not sure what the stock blade thickness is for a tiger cat. if they aren't 3" wide then the G6 will be too big of a blade to work on it. alot of it has to do with how much hp the engine has. the G5 would be a better choice if that is the case. if stock blades are 3" wide then G6 is the perfect choice.
     

Share This Page