generator no current

Discussion in 'Mechanic and Repair' started by MOW PRO LAWN SERVICE, Jan 29, 2013.

  1. MOW PRO LAWN SERVICE

    MOW PRO LAWN SERVICE LawnSite Bronze Member
    Posts: 1,566

  2. BILLSMOWERS

    BILLSMOWERS LawnSite Member
    Posts: 39

    you need to test the inverter board aprox £300 uk to replace not shore of us cost. check all the multi plugs to the board they can be temperamental to work on
     
  3. MOW PRO LAWN SERVICE

    MOW PRO LAWN SERVICE LawnSite Bronze Member
    Posts: 1,566

    how do i test the inverter board?

    with a oem meter?

    thx
     
  4. Darryl G

    Darryl G LawnSite Fanatic
    Posts: 8,033

    Could be a loose wire from the inverter to the receptacles.
     
  5. Oldtimer

    Oldtimer LawnSite Bronze Member
    Posts: 1,454

    Parts Are NLA.

    Oldtimer
    Posted via Mobile Device
     
  6. MOW PRO LAWN SERVICE

    MOW PRO LAWN SERVICE LawnSite Bronze Member
    Posts: 1,566

    so it is rip.

    i might fool with it a little i have been from one end to the other.
     
  7. Darryl G

    Darryl G LawnSite Fanatic
    Posts: 8,033

    You open the panel and check all wire connections? Also seems strange there's no fuse. You sure it's not hiding on you somewhere?
     
  8. ecurbthims

    ecurbthims LawnSite Senior Member
    Posts: 468

    What parts are nla ?I have a friend who is a dealer for kipor ,and he has run into no issues so far getting parts .
     
  9. MOW PRO LAWN SERVICE

    MOW PRO LAWN SERVICE LawnSite Bronze Member
    Posts: 1,566

    i do not see a fuse.

    pics later
     
  10. Oldtimer

    Oldtimer LawnSite Bronze Member
    Posts: 1,454

    It makes 120v - converts to 12v - then inverts to 120v. Evidently the inverter has failed.

    It might be possible to find an inverter on the internet.

    We are a warranty/service center for all brands of RV generators, most brands of portables & several brands of standby generators.


    Oldtimer
     

Share This Page