1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

Getting Tractor Unstuck

Discussion in 'Tractors' started by bob, Jan 7, 2003.

  1. bob

    bob LawnSite Platinum Member
    from DE
    Posts: 4,254

    Any ideas

  2. Mowingman

    Mowingman LawnSite Platinum Member
    from Texas
    Posts: 4,647

    Been there-done that.
    1. Log skidder with winch
    2. Bulldozer with winch
    3. Heavy duty wrecker used for towing big tractor trailer rigs.:D
  3. leadarrows

    leadarrows LawnSite Senior Member
    from N/A
    Posts: 925

    Un -hook that field cultivator pull the tractor out with another tractor. Then pull the cultivator out from the back with a chain. Been their done that. More than once.:)
  4. Arnold

    Arnold LawnSite Member
    from Wyoming
    Posts: 194

    Now I have had a few things stuck in the mud but not that stuck I'll be scratching my head on this one for awhile.:confused:
  5. hosejockey2002

    hosejockey2002 LawnSite Bronze Member
    Posts: 1,195

    I'd get a 200 size (45,000 lb.) or so size excavator to dig out the wheels and dig a "ramp" up to firmer ground. That's a big machine to bury up to the tops of the wheels and then try to pull out.
  6. Randy J

    Randy J LawnSite Bronze Member
    Posts: 1,124

    You could just consider it yard art:D


    Be sure and post how you got it out, I'd love to hear.

  7. stslawncare

    stslawncare LawnSite Bronze Member
    from DE
    Posts: 1,484

    where is that tractor at? id imagine somewhere that had a flood?
  8. TOOLS1

    TOOLS1 LawnSite Member
    Posts: 7

    My great Grandfather once lost a steam engine in the same way. Its still there.:eek: People still talk about it.
    Did you ever get this one out?
  9. Imow4u2

    Imow4u2 LawnSite Senior Member
    Posts: 377

    this pic. has been all over the net. in fact I think it showed up last spring when it was wet here in the midwest. I would dig away from it with a 44,000 pound hoe and then hook a good sized cable and pull it out. If you are the owner or operator of this machine you are a fool for taking the x-tra time to stick it even worse. Been there done that and leaned my lesson........

Share This Page