Glue or gasketed?

Discussion in 'Irrigation' started by greenmonster304, Feb 23, 2012.

  1. greenmonster304

    greenmonster304 LawnSite Gold Member
    Posts: 3,074

    well they finally got their act together and figured out what they wanted. They are applying for grant money from the county so the county provided these plans. they will also come out to inspect the project and if it is not to their specs they don't pay out. the two maps join they are on the north and south sides of a road. any thoughts?
     

    Attached Files:

  2. agrostis

    agrostis LawnSite Silver Member
    Posts: 2,268

    Steel pipe w/ ductile, bolted fitting's where it cross's the road. Major thrustblock's at all bend's and end's.
     
  3. Sprinkus

    Sprinkus LawnSite Silver Member
    Posts: 2,100

    Kind of hard to tell without reading the specs.
     
  4. the irrigator

    the irrigator LawnSite Member
    Posts: 60

    How are you going to cross the road ? If a public road a permit will probably be required, which means that portion of the work will be subject to inspection. Surety bond to cover any damage to the road whether you bore or do an open cut may be required as part of the permit process.
     
  5. Mike Leary

    Mike Leary LawnSite Fanatic
    Posts: 21,903

    What specs? This is our favorite County in the NE to bash, after all. :hammerhead: Unless there is some paperwork we've not seen, they've taken "design/build" to a whole new level! :dizzy:
     
  6. greenmonster304

    greenmonster304 LawnSite Gold Member
    Posts: 3,074

    There is an existing steel sleeve under the road
    Posted via Mobile Device
     
  7. greenmonster304

    greenmonster304 LawnSite Gold Member
    Posts: 3,074

    There is more paper work that has not yet been forwarded to me as the county employee in charge is on vacation, typical.
    Posted via Mobile Device
     
  8. greenmonster304

    greenmonster304 LawnSite Gold Member
    Posts: 3,074

    well they finally pulled the trigger on part of this project. we will be installing the north side of the system this fall. It will be 2000' of 6" and 1200' of 4". should be a nice job for the end of the year between blow outs.

    speaking of blow outs someone needs to start a winterizing thread for this year.
     
  9. 1idejim

    1idejim LawnSite Fanatic
    Posts: 9,316

    You digging or trenching?
    Posted via Mobile Device
     
  10. greenmonster304

    greenmonster304 LawnSite Gold Member
    Posts: 3,074

    Mostly trenching but a little digging.
    Posted via Mobile Device
     

Share This Page