1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

Gobbler with a 36" Exmark Tracer?????

Discussion in 'Lawn Mowing' started by Jon99, May 14, 2003.

  1. Jon99

    Jon99 LawnSite Senior Member
    Posts: 375

    Looking for a way to mount the bracket, anyone else using this type of set up????

    from AL
    Posts: 656

    Try an Accelerator. Better catcher & it goes on the eXmarks easily with no brackets or plates.
  3. I would bet since he is looking for a way to mount it, he already has it and is not going to go buy a different one.

    Hardware store, bolt a peice of metal to raise the bracket up to match the height of the discharge lip on your Exmark, this should let you put your mount on and clear the lip.

    Might look for some square tubing. Also might have to bolt through the whole tube.
  4. Jon99

    Jon99 LawnSite Senior Member
    Posts: 375

    If I do this, won't the opening to the Gobbler be higher than the chute on the mower????
  5. I think you quoted the wrong person.

    But it will raise you up about what 3/4 to 1"? Should still work.

Share This Page