1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice
  1. scott185

    scott185 LawnSite Member
    Posts: 19

    Thanks for the info guys, I actually have some conveyer belt
    from a local belt manufacture but it is not thick enough. I will try the junk yard. If anyone is interested I found a site related to this subject http://www.rpi.edu/~thompb3/NewPages/snoplow.html
  2. finnegan

    finnegan LawnSite Member
    Posts: 109

  3. Michael Fronczak

    Michael Fronczak LawnSite Member
    Posts: 230

    Didn't know they were studing that, thats great. Thanks hope everyone sees it.
  4. 75

    75 LawnSite Senior Member
    Posts: 992

    scott185: that's a really interesting page, well worth a look. (Studies done at RPI in New York on methods of controlling/reducing snow spray off plows. Deals with the big DOT plows but the principles are the same for smaller units) By the way, another possibility for some good heavy belting is an aggregate company, usually if there are conveyors there's bound to be some old belting nearby.

    1975 GMC C-35

Share This Page