Grass Gobbler/Proline cutting problem

Discussion in 'Mechanic and Repair' started by bowpro, Sep 24, 2005.

  1. bowpro

    bowpro LawnSite Member
    Posts: 8

    I have a 36in. proline floating deck, and tried to put the gobbler bagger on yesterday to suck up leaves. Problem is that the side where the bagger attaches cuts lower than the other side. Is there some way to adjust the deck, or is a counter weight needed. Thanks for the help.
     
  2. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,022

    Sounds like somebody didn't design a bagger very well, On a floating deck I would guess a counter weight.
     
  3. topsites

    topsites LawnSite Fanatic
    Posts: 21,653

    It's not just the float-deck, the fixed does it, too... It's a simple matter of having a heavy azz attachment on the side, these machines aren't called Grand Toro Recyclers because of their bagging abilities as that is not what they were designed for. Learn how to use the Recycler for what it was made for and you can remove all the extra hardware and NEVER bag another lawn again.
     

Share This Page