Gravely Kaw.25/60 zero-turn

Discussion in 'Mechanic and Repair' started by motsinger's lawn care, Apr 27, 2010.

  1. motsinger's lawn care

    motsinger's lawn care LawnSite Member
    Posts: 1

    My father has a Gravely 25/60 and for us to get it to cut decent we had to put the high lift blades on it like I have on my Lazer Z. The mower seems as though it does not have enough blade tip speed. What I'm asking, can the Kaw. 25 be turned up a bit in RPM's at full throttle?
     
  2. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024

    It can be set at 3700 no load RPM's, Wouldn't take it much higher than that.
     
  3. lonestar98

    lonestar98 LawnSite Member
    Posts: 3

    Not so much an engine issue, as the idler spings are not set up to run tight. Look at newer xdz deck, the springs are stronger. I would replace with those or rig to strech factory springs a little more, assuming that you already check to spindles to make sure that they are still good. I had to replace mine, (greaseless.)
     

Share This Page