Guanti recommendation

Discussion in 'Landscape Lighting' started by TheHotShotKid, Feb 28, 2006.

  1. TheHotShotKid

    TheHotShotKid LawnSite Member
    from Ohio
    Posts: 169

    My H2B workers are complaining that their hands are getting torn up and are suggesting I supply them with Guanti's to work with. I post it here because they need to be the type that make it possible to work with wires, cables connections etc but tough enough to protect their hands. Any suggestions are greatly appreciated .
    P.S.- I bought them some of those brown .99 pairs at home depot and they tore up in a week. I don't want to go crazy here but I don't want a mutiny from my help either. Thanks again.
     
  2. niteliters

    niteliters LawnSite Senior Member
    Posts: 537

    don't know if this will help but we go to an automotive retailer and by mechanics gloves..some with the fingers but mostly the fingerless gloves as it allows for the most dexterity when wiring.
    chris
     
  3. niteliters

    niteliters LawnSite Senior Member
    Posts: 537

    also, being from Ohio you have cold weather like I do here in Kentucky. The fingerless also keep my hands pretty warm. What part of Ohio are you from??
     
  4. steveparrott

    steveparrott Sponsor
    Posts: 1,206

    A small point but important. Twisting wire nuts is a hand killer. If you solder the connection first, the wire nut goes on very easy - your workers will thank you.
     
  5. Pro-Scapes

    Pro-Scapes LawnSite Platinum Member
    Posts: 4,181

    Not to mention Im sure you will thank yourself when you dont have to locate a bad splice. Just makes sence to solder and get a good bond.
     

Share This Page