gutter cleaning

Discussion in 'General Industry Discussions' started by Big Bad Bob, Jan 24, 2008.

  1. Big Bad Bob

    Big Bad Bob LawnSite Bronze Member
    from zone 5
    Posts: 1,074

  2. tinman

    tinman LawnSite Bronze Member
    from ga
    Posts: 1,348

    this is a neat device and would save a lot of work.
     
  3. Raven386

    Raven386 LawnSite Silver Member
    from CT
    Posts: 2,160

    in the video it didnt look like it was getting much of the wet stuff out. just looked like it loosened it and threw it around.
     
  4. tinman

    tinman LawnSite Bronze Member
    from ga
    Posts: 1,348

    probably best to do it b4 it gets bad or do it by hand then maintain with the robot
     
  5. Raven386

    Raven386 LawnSite Silver Member
    from CT
    Posts: 2,160

    maybe after it was loosened you can bring a hose up there and wash it all down the downspout? if thats the case, its a pretty neat little gadget! not that expensive either, what only $168....
     
  6. 44DCNF

    44DCNF LawnSite Bronze Member
    Posts: 1,462

    Interesting! The first thing that came to my mind that would be a tough obstacle to overcome, is large branch pieces that wedge in a gutter under the hanger straps or nails. Would it cause this tool to lift and come out of the gutter and fall 25 feet to it's death? I have to go back and read their site a little better. Maybe they address that.
     
  7. the ace

    the ace LawnSite Member
    from usa
    Posts: 147

    What happens when that gadget starts throwing mud and slop all over the nice clean white siding. Nothing beats a good hand cleaning.
     
  8. Raven386

    Raven386 LawnSite Silver Member
    from CT
    Posts: 2,160

    thats why when your done, you tell the people that you do power washing and charge them for that too!
     

Share This Page