help me!!!!!!

Discussion in 'Lawn Mowing' started by Mowerboy04, Jan 21, 2005.

  1. Mowerboy04

    Mowerboy04 LawnSite Bronze Member
    Posts: 1,445

    i need to change the paddles on my toro snow thrower. so i took the old ones off and got new ones. when i went to put them on i got to of the holes to line up but the other two won't almost like there to short. i wold post pics but my camra is broke. but if any one can help please don't hesitate to respond.
    thanks
     
  2. stumper1620

    stumper1620 LawnSite Bronze Member
    Posts: 1,889

    what model is it? i have 3 toros out here i can go check and see if i can help out.
     
  3. Mowerboy04

    Mowerboy04 LawnSite Bronze Member
    Posts: 1,445

    it is a 2400e
     
  4. stumper1620

    stumper1620 LawnSite Bronze Member
    Posts: 1,889

    i'm eating pizzia right now, but in about 5 miniutes i'll run out and take a look at what i've got.
     
  5. stumper1620

    stumper1620 LawnSite Bronze Member
    Posts: 1,889

    i just looked at the units i have 2 of them are held on with 7 bolts, and my big one has 6 bolts. if you lay a new paddle on one of your old ones does anything match up. try flipping it or swap locations, otherwise it sounds like you have the wrong paddles for your machine.
     

Share This Page