Help with my Reel Mower!!!

Discussion in 'Sports Field Management' started by greeninga, Jun 17, 2008.

  1. greeninga

    greeninga LawnSite Member
    from GA
    Posts: 81

    I have a toro 2600-d reel mower, the reels are barely moving. I tried bleeding it, (or so I think I did) and that did not work, so what do I need to do now? Any advice?? Thanks
     
  2. grassman83

    grassman83 LawnSite Member
    Posts: 11

    Check reel to bedknife clearance (turn by hand) if you cant turn by hand, then there is your answer.
    Low hydraulic fluid
    Check reel speed control.
     
  3. dave k

    dave k LawnSite Bronze Member
    Posts: 1,178

    If you don't have a manual, you can download it from Toro, just type in your model and serial # and you'll get it, was the reels operating ok prior to this, as the other post said, check the speed control which is under the black plastic cover to your right.
     
  4. dave k

    dave k LawnSite Bronze Member
    Posts: 1,178

    Did you fix it?
    What was wrong with it?
     
  5. k911lowe

    k911lowe LawnSite Senior Member
    Posts: 526

    should be able to cut a piece of paper.make sure there is that clearance.
     
  6. barefootlawnsandlandscape

    barefootlawnsandlandscape LawnSite Senior Member
    Posts: 296

    Does that model have a reel speed controller? Some models have adjustments where you can set your reel speed to match your ground speed. Just wondering if the adjustment got turned down somehow.
     

Share This Page