1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

Help with patio

Discussion in 'Hardscaping' started by ALLPro Landscaping, Jul 19, 2010.

  1. ALLPro Landscaping

    ALLPro Landscaping LawnSite Senior Member
    Posts: 813

    Hello to all, I have a job in progress right now which is a large patio, we are using unilock Camelot pavers, my question whats the easiest way to round corners, I have done a few paver jobs but always just a large square, which this one was supposed to be but now the customer changed his mind. Also since I have rounded corners, would it be a good idea to do the solder coarse first then lay inside pavers Thanks
     
  2. jake22si

    jake22si LawnSite Member
    Posts: 9

    You could use a piece of flexable edging and mark your corner then cut it with your cut off saw. Just make sure to angle in when you cut. It would be faster than laying the soldier course and cutting each individual paver to fit
     
    Last edited: Jul 20, 2010
  3. ALLPro Landscaping

    ALLPro Landscaping LawnSite Senior Member
    Posts: 813

    So what ur saying is to lay my interier pavers first mark how i want the remove them to cut then replace them then lay my solder coarse
    Posted via Mobile Device
     
  4. jake22si

    jake22si LawnSite Member
    Posts: 9

    I meant lay the pavers and use a gas powered cut off saw to cut them in place being carefull not to move them too much. It's fairly simple. Then if you stepped in the sand, just touch it up for the soldier course.
     
  5. ALLPro Landscaping

    ALLPro Landscaping LawnSite Senior Member
    Posts: 813

    Got it, Thanks alot for your help
     
  6. jake22si

    jake22si LawnSite Member
    Posts: 9

    how did it come out?
     
  7. ALLPro Landscaping

    ALLPro Landscaping LawnSite Senior Member
    Posts: 813

    Let you know on Friday, Laid the base today, I will be laying the pavers on Friday. Ill keep upi posted with some pics
     

Share This Page