Help with Toro WB mulching kit

Discussion in 'Lawn Mowing' started by CRM Lawncare, Nov 22, 2004.

  1. CRM Lawncare

    CRM Lawncare LawnSite Member
    Posts: 176

    Recently picked up a late 90's toro 44" proline with the mulching kit installed. I wanna side discharge with it. Is it as simple as unbolting the baffles between the blades or what is required. I don't have the manual for the mower as the previous owner lost it. Need to get one but wanna remove the kit asap.
     
  2. sildoc

    sildoc LawnSite Silver Member
    Posts: 2,925

    If it is the same as the 36" all you have to do is unbolt all bolts attached to mulching baffles. Now mind you there are a couple that hold the kickers on. You will be in business in about 15 min. 10 if you have air wrenches and a good lift for the walk.
     
  3. PMLAWN

    PMLAWN LawnSite Gold Member
    Posts: 3,535

    Also the plate that covers the discharge opening. Reinsert the bolts into the holes on the deck (studs up) to keep dust from passing thru the holes. There is a baffle that goes at the discharge but it sounds like you did not get that. Not sure how much diff. that makes but your dealer could get one if you need it.
     

Share This Page