Hiding Wire

Discussion in 'Landscape Lighting' started by coxlandscaping, Oct 26, 2008.

  1. coxlandscaping

    coxlandscaping LawnSite Member
    Posts: 104

    I need some advice on how you all would go about getting and hiding the wire to the location (arrow) in the picture. The whole house is stone and is an older home that is being remodeled. This is a starter home for one of my customer’s daughter.

    Drawing1.jpg
     
  2. S&MLL

    S&MLL LawnSite Senior Member
    Posts: 751

    Alot of guys like to use the gutters.

    Are you doing flower pot lights or something?


    But I would just run some 1/2"down the side of the gutter. And paint it to match the gutter. Only other thing would be to go into the attic and run across the house and drop down the back of the house. But you have to use 12/2 romex for that. Which is expensive.
     
  3. JoeyD

    JoeyD LawnSite Silver Member
    Posts: 2,933

    I would probably use the downspout to run the wire up. Once in the gutter I would come out and keep the wire on the wedge covering it with some wood corner molding that you can paint.
     
  4. S&MLL

    S&MLL LawnSite Senior Member
    Posts: 751

    Joey i have been meaning to upload a picture and send it to you. Its of your gutter mount.
     
  5. Lite4

    Lite4 LawnSite Gold Member
    Posts: 3,112

    Are you placing a light on that beam or inside it? Depending on the exact placement of the light, I would probable fish my wire up that gutter and drill a small hole in the top section of the gutter, (right where it meets the bottom of the beam) and fish it over from there. Like I said though, I don't know exactly where the light is going.
    Good Luck
     
  6. JoeyD

    JoeyD LawnSite Silver Member
    Posts: 2,933

    email it to me!!! I would love to see it!

    joey.digiovanni@uniquelighting.com
     

Share This Page