1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

Holding the Pattern

Discussion in 'Hardscaping' started by clarcon, Jul 19, 2005.

  1. clarcon

    clarcon LawnSite Member
    Posts: 8

    I am wondering if it is possible, without too much extra cutting of pavers and with holding to some pretty tight joint tolerances, to hold a 45 degree herringbone pattern as it winds through a curve filled sidewalk. The tightest radius is 28'-6"' on the prints. It seems to me that the pattern would be as if the whole area was filled solid as a patio and the walk was carved out of it. Any help would be greatly appreciated.

    Craig Clark
    Clark Construction
  2. mbella

    mbella LawnSite Bronze Member
    Posts: 1,284

    You are right. You need to layout and overlay the perimeter of your walk. After overlaying, draw your curves on the overlaid pavers and cut.

Share This Page