1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

homelite ST-200 part

Discussion in 'PartsTree.com' started by blacktrain, Aug 8, 2007.

  1. blacktrain

    blacktrain LawnSite Member
    Posts: 6

    Looking for the shaft housing for a Homelite ST-200 trimmer. UT# 20501 Serial # 010820296 The old part number was # A96205A I am sure the part number has been superceeded. I don't care if it's new or used. I would purchase the complete machine if i had too. I appreciate any help. Thanks!!!
     
  2. partstree

    partstree Sponsor
    Posts: 79

    Looks like the ST200 might date back a little too far for our records. Appears there were at least three revisions to the trimmer, but it's unknown whether or not the shaft housing was affected by the changes. I'm unable to find any information on the Homelite part A-96205-A. I know of an individual that specialized in older Homelite parts, I don't think he still does it, but I will keep an eye out for you and try to find you his contact information.
     
  3. SnapperfanRedmaxman

    SnapperfanRedmaxman LawnSite Member
    Posts: 54

    I have a couple old ST-200's that you can part out. I will sell both of them to you. When put away both engines ran fine. Seems to me maybe one of the flex shafts were rounded off on the ends. Lots of good parts. I can send picture of what I have. Let me know.
     
  4. blacktrain

    blacktrain LawnSite Member
    Posts: 6

    I would buy one of them, the part I am after is the shaft tube, but I would buy the whole thing if you like. Let me know the price and an address and I will send you payment. I sincerly appreciate your help. Thanks!!!
     
  5. SnapperfanRedmaxman

    SnapperfanRedmaxman LawnSite Member
    Posts: 54

    Are you looking for the curved aluminum tube that goes from the engine to the head that houses the flex shaft? Send me your address.
    Jan
     
  6. blacktrain

    blacktrain LawnSite Member
    Posts: 6

    Yes, it's the curved aluminum tube that goes from the engine to the head and houses the flex shaft. My address is:

    [address removed for privacy]

    I appreciate all your help. Thanks...
     
  7. SnapperfanRedmaxman

    SnapperfanRedmaxman LawnSite Member
    Posts: 54

    I have not forgotten your shaft tube. I am having a hard time locating a box.
    I hope to ship it this week. I will let you know. Jan
     
  8. blacktrain

    blacktrain LawnSite Member
    Posts: 6

    I appreciate all your help, please let me know your name and address and the amount I owe so I can send you payment. Again, thanks...
     
  9. bc1263

    bc1263 LawnSite Member
    Posts: 9

    snapperfanredmaxman do you still have the st-200 to part out?
     
  10. blacktrain

    blacktrain LawnSite Member
    Posts: 6

    Actually I'm not parting one out I am trying to find a shaft for the one I have. But thanks for your interest.
     

Share This Page