Honda 216 gearbox

Discussion in 'Mechanic and Repair' started by gardenergreg, Jul 3, 2008.

  1. gardenergreg

    gardenergreg LawnSite Member
    Posts: 8

    Hi all just finished putting new clutch gears in a honda 216 3 speed 21inch mower bolted it all back together but darned if I can find a filler hole to put new oil in?? any help much needed thanks .
     
  2. ltoups

    ltoups LawnSite Member
    Posts: 5

    gardenergreg:

    I have a Honda HRT 216 that may have the same problem you just fixed. It simply does not pull in any gear. I checked the cable and it is fine. I checked the axle and it is free from debris It must be in the gear box. Where did you fine the drawing/parts breakdown and what did you have to replace?

    Thanks
    Lanny
     
  3. gardenergreg

    gardenergreg LawnSite Member
    Posts: 8

    Hi Lanny before ifixed the box it was making a loud clicking sound from the gear box ,so I pulled the box down for inspection found the cause to be the clutch gears ,with new clutch gears from the local mower shop now installed it goes great ..also found a bolt at the top which is for ajustment of the gear lever that i put 250ml oil in..(you can buy new boxes from a honda dealer but if mechanicly minded i would give it a go )hope this helps.
     
  4. ltoups

    ltoups LawnSite Member
    Posts: 5

    Thanks I will give it a go.

    Lanny
     

Share This Page