honda hr215 transmission

Discussion in 'Lawn Mowing' started by husqvarna600c, Jul 9, 2004.

  1. husqvarna600c

    husqvarna600c LawnSite Member
    Posts: 103

    Does anyone know what kind of gear lube / grease would go into the transmission of a honda hr215 with a three speed.
     
  2. sildoc

    sildoc LawnSite Silver Member
    Posts: 2,925

    check the owners manual. I am not sure since I have the Hydro model. I am guessing 15/50 or 90 wt? but owners manual will say for sure.
     
  3. husqvarna600c

    husqvarna600c LawnSite Member
    Posts: 103

    i wish i had one but i dont.
     
  4. twobroslawns

    twobroslawns LawnSite Senior Member
    Posts: 299

    Im interested to know if there is any maint. on these trannys. We have one and the manual doesn't say a word about it. I have never found any grease ports/dipsticks or anything like that and I'm afraid to open it up to look because I might bust it.
     
  5. MnGreen

    MnGreen LawnSite Senior Member
    Posts: 354

    Dealer told me they are not meant for service when I called about how to refill and with what.
    Mine have over 800 hrs on them so it must not be a issue.
    Straight 30 I believe he told me, not sure.
    Mower has to be upside down to refill if you take the cover off the tranny.
     
  6. twobroslawns

    twobroslawns LawnSite Senior Member
    Posts: 299

    hmmmm. I'll have to check that out

    Thanks
     

Share This Page