Hose end sprayer

Discussion in 'Pesticide & Herbicide Application' started by ronhon, Sep 5, 2006.

  1. ronhon

    ronhon LawnSite Member
    Posts: 2

    There is dialer with numbers from 1 to 50 on my hose end sprayer. Anybody can help how the number works? Thanks in advance.
     
  2. TOMMY1115

    TOMMY1115 LawnSite Member
    Posts: 169

    Hard to say without knowing the type of hose end it is. Regardless of the type, you still would need to read the directions it came with as every model is different. For instance, the Ortho ones you dial in the amount of product you want to spray per 1000.

    Read the directions would be my suggestion.
     
  3. upidstay

    upidstay LawnSite Bronze Member
    from CT
    Posts: 1,357

    Confuscios say:

    "When all else fails, read the directions."
     
  4. RigglePLC

    RigglePLC LawnSite Fanatic
    Posts: 12,338

    Don't read the directions. Unreliable. Test it yourself. Do a calibration test with colored water. Measure out exactly 1000 sq ft. Do it three times or until the results are consistent.
     
  5. teeca

    teeca LawnSite Bronze Member
    Posts: 1,202

    better yet, throw it away so you don't use it.
     

Share This Page